The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a extremely productive photo voltaic controller created for off-grid photo voltaic systems. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for an array of photovoltaic (PV) apps.
Critical Options in the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Twin-Stage Charging for Improved battery daily life.
Liquid crystal display Display screen with genuine-time information monitoring.
Multiple Load Control Modes including manual and timer.
Comprehensive Digital Protections in opposition to overcharging, over-discharging, shorter circuits, and reverse polarity.
Move-by-Action Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN unit, temperature sensor, communication cables, and person guide.
Confirm the model number and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Find a nicely-ventilated, dry place near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring Read more the Photo voltaic Cost Controller
Warning: Constantly stick to appropriate security protocols and ensure the procedure is driven off just before connecting components.
Move one: Hook up the battery terminals towards the cost controller (good to positive, destructive to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Phase 3: Link the load terminals if using a immediate load link.
Move 4: Double-check all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability on the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, light-weight Command.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 communication port employing application like Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Challenge 1: No Electric power Output
Examine battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: About-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if required.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how ensures:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Longer Battery Lifetime: Regular and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is undoubtedly an Outstanding choice for optimizing solar energy technology and extending battery lifetime. By following the above set up guideline, customers can guarantee most efficiency and program longevity.