The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is a very economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) purposes.
Essential Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Solar Charge Controller technology for excellent solar energy harvesting. Important attributes include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time details checking.
Many Load Regulate Modes which include guide and timer.
Thorough Electronic Protections in opposition to overcharging, above-discharging, small circuits, and reverse polarity.
Phase-by-Phase Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller utilizing the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Solar Charge Controller
Warning: Constantly stick to correct protection protocols and make sure the technique is powered off prior to connecting factors.
Action 1: Link the battery terminals for the charge controller (favourable to constructive, damaging to damaging).
Phase two: Hook up the solar panel array for the PV input terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Action 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Settings
Electrical power on the controller by connecting the battery first.
Utilize the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info can be logged via the RS485 communication port applying software for instance Solar Station Computer Read more system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Issue 1: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if vital.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations during the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technology assures:
Better Performance: Decreased Electricity losses in the course of conversion.
Increased Trustworthiness: Stable effectiveness below variable hundreds.
Lengthier Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Extraordinary option for optimizing solar power technology and extending battery everyday living. By adhering to the above mentioned set up manual, users can make certain maximum efficiency and method longevity.